Technology
RapidBend Plus
RapidBend Plus is a performance technology designed for high-speed press brakes that employs a dynamic muting process that enables the tools to close safely at high-speed until the punch is just 2mm above the material surface. This minimises the slow speed travel distance on every bend cycle for both flat profile parts and box profile parts with side flanges.
RapidBend Plus is compatible with most high-speed performance CNC press brakes*, reducing the minimum speed change point down to 2mm.
In comparison with other systems, RapidBend Plus technology can reduce your machine cycle time by more than two seconds per cycle, representing a significant saving in operating time and cost.
*For retrofit applications, RapidBend Plus can reduce the minimum speed change point to 2mm, however results may vary depending on the press brake type and capabilities. Consult your Lazer Safe Retrofit Dealer for more information.
AutoSense
AutoSense is an automatic monitoring technology that tracks machine operation and performance in real time. AutoSense automatically monitors control commands, motion, direction, speed and stopping performance to maintain a high level of machine and operator protection. AutoSense also guarantees compliance with international safety standards that mandate automatic monitoring of machine overrun and safe speed.
BendShield
BendShield technology provides advanced optical protection by enveloping the punch tip with a protective field that has no gaps. BendShield has an object detection resolution of 2mm to detect even the smallest obstruction from any angle. Optical protection remains active until the tool opening is reduced to 2mm preventing fingers and hands entering the point of operation.